Specs:
- Type: Coaxial Electric Micro Heli
- Main Rotor Diameter: 13.60 in (345mm)
- Gross Weight: RTF w/Li-Po battery, 8.0 oz (227 g)
- Length: 15.75 in (400mm)
- Motor Size: Dual 180 main motors
- Kit/ARF/RTF: RTF
- Height: 7.17 in (182mm)
- Main Rotor Diameter: 13.60 in (345mm)
- Main Motors: 180 (2 installed)
- Weight RTF w/Li-Po battery: 8.0 oz (227 g)
- Battery: 7.4V 800mah Li-Po (included)
- Transmitter: FM 4-Channel (included)
- On-Board Electronics: 4-in-1
- Receiver/mixer/ESC/gyro (installed)
|
E-SKY LAMA 4 RTF Coaxial Helicopter
|
Blade CX2 RTF Electric Coaxial Micro Helicopter
Key Features
- BONUS: Now includes aluminum head/hub, over-current protection PTC resettable fuse devices, 3-in-1 control unit and Spektrum AR6100e receiver
- Flight ready—no assembly required
- Test flown at the factory to ensure proper setup out of the box
- Interference-free 5-channel E-flite® transmitter with built-in Spektrum™ 2.4GHz DSM® technology
- Coaxial, counter-rotating rotor blades that make hovering easy
- Two feather-light S60 Super Sub-Micro Servos—just 6.0 grams each
- 2-cell 7.4V 800mAh Li-Po battery pack with Charge Protection Circuitry
- 2–3 Cell DC Li-Po Balancing Charger and AC Adapter
- Most parts compatible with the Blade CX
|
Esky LAMA 4 DX RTF Coaxial Helicopter
-
Main Rotor Diameter:340mm
-
Weight:230g
-
Length:408mm,Width:85mm,Height:180mm
-
Power system:180 Motor x 2;
-
Transmitter :Standard 4 CH;
-
Mix Controller:4 in 1 controller (W/gyro,mixer,ESC,receiver)
-
Servo:8g,1.3kg.CM,0.12s/60°
-
Battery:7.4V 800mAh Li-polymer battery
-
Includes AC Lipo Balance Charger and 8 "AA" Batteries!
|
Blade 400 3D RTF Electric Mini Helicopter
Specs
- Type:RTF Electric 3D Mini Heli
- Main Rotor Diameter:28.2 in (718mm)
- Tail Rotor Diameter:5.3 in (135mm)
- Gross Weight:RTF with Li-Po battery, 23.5 oz (665 g)
- Length:25.6 in (650mm)
- Motor Size:420H brushless outrunner, 3800kV
- Kit/ARF/RTF:RTF
- Control System:Spektrum DX6i 2.4GHz DSM2 computer programmabe transmitter (included), Spektrum AR6100e Microlite receiver (installed), DS75 Digital Sub-Micro Servos (4 installed), 120 degree CCPM
- Rotor Blade Length:12.8 in (325mm)
|
Pigeon 450M1 RTF
Electric Helicopters are the hottest thing in the R/C Industry right now. A 100% Ready-to-Fly Electric Helicopter that retails for under $500USD? The Pigeon 450M1 is packed full of features including a full arsenal of aluminum upgrade parts, head-lock gyro, high end brushless power system, 6 Channel Radio, and even a 2200mah Lipo Battery with Balance Charger! Just add "AA" batteries and start flying within the hour! Being introduced into the world of professional electric helicopter flying has never been so easy! |
 |
AGNH1100
Features
- Extreme 3D capability right out of the box
- 95% factory-assembled
- Stacked aluminum frames
- Direct-to-swash CCPM linkages
- Aluminum and composite swashplate
- Gun-metal gray aluminum head block
- Aluminum motor and battery mounts
- Gun-metal gray aluminum skids and tail boom
- Tail servo boom mount
- Belt-driven tail rotor
- Stainless steel tail rotor hub
- Auto-rotation system
- 325mm PRO symmetrical wooden main blades
Specifications
- Main Rotor Diameter: 27.6 in (700mm)
- Tail Rotor Diameter: 5.9 in (150mm)
- Gross Weight: 22–24 oz (620–680 g)
- Length: 25.6 in (650mm)
- Kit/ARF/RTF: ARF
|
 |
KX015036A
Specifications:
- Length:650mm
- Height:230mm
- Main Rotor:680/700mm
- Tail Rotor:150mm
- Motor Gear:13T/11T
- Main Gear:150T
- Autorotation Tail Drive Gear:106T
- Tail Drive Gear:25T
- Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24
- Weight(without power system):365g
- Weight(including power system):690g
|
 |
KX016002A
- Length:1200mm(47.25 in)
- Height:388/405mm(15.25 in/16 in)
- Main Blade Length:600mm
- Main Rotor Diameter:1350mm(53.15 in)
- Tail Rotor:240mm(9.45 in)
- Motor Drive Gear:10T(11T optional)
- Main Drive Gear:170T
- Autorotation Tail Drive Gear:180T
- Tail Drive Gear:40T
- Drive Gear Ratio:1:17.0:4.5/1:15.45:4.5
- Weight(w/o main blade):1340g
- Flying Weight:Approx 3000g(6.6 lbs)
|
Raptor 30 v2 PRO ARF
Specification:
Full Length of fuselage: 1150mm (45.27")
Full width of fuselage: 140mm (5.51")
Total height: 400mm (15.75")
Main rotor dia: 1245mm (49")
Tail rotor dia: 260mm (10.25")
Gear ratio: 1:9.56:4.57
Full equipped weight: 3000g (6.6 lbs)
Vibe 50 3D Pro Heli
Key Features
- Dual stage main gear
- CNC machined aluminum head block
- Push-pull control on all cyclic servos
- Forward mount engine
- 120 or 140 CCPM control system
- Pre-painted fiberglass canopy
- Accepts 600-620mm blades
- High tilt flybar
- Governor mount and pre-drilled clutch for governor magnets
- Break away body mounts
- High efficiency two piece fan housing
- Hi-cyclic head for extreme cyclic response
- Driven tail with free-floating aluminum shaft
- Robust clutch, drive train from Vibe 90
- Easily removed, vibration-isolated tank
- Weight adjustable flybar paddle design
- Dual yoke T/R actuator
- FRP canopy with decals
The Gohbee Stinger is a direct replacement for
the TT
"Raptor" range. All parts are inter - changeable so all current "Raptor
owners" fear not! Your heli parts are available at Pyramid Hobbies!
ARF kit - 90% preassembled
Fiberglass Canopy
Wood Blades
This almost-ready-to-fly (ARF) .30 radio controlled helicopter comes
complete with all the standard Gohbee Stinger features and a fiberglass
canopy. Many of the parts below the rotor head are interchangeable with
the 30-size Raptor chopper and you will find flying the Stinger heli
even more of a thrill with its easy control characteristics and full 3-D
capability.
If you are into radio controlled aircraft, you will find no better
addition to your hanger than the Gohbee Stinger. Just add your engine
and control electronics and you are ready to go!
Product Description:
 The
Stinger 30 is an all out 3D performance monster that is gentle as
a dove when desired. Our goal was to develop an RC helicopter that
surpassed existing benchmarks for stability while achieving superior
agility in performing 3D maneuvers. In short, we wanted the ultimate RC
helicopter- forgiving to the beginner yet incredibly responsive for the
advanced pilot. When we started designing the Stinger we took into
consideration some of the best RC heli designs available in today's
market. Then our engineers improved these designs and mixed them with
there own creative ideas to produce the ultimate RC helicopter – the
STINGER! For the beginner the Stinger can be setup to achieve
unsurpassed stability. For the advanced pilot the Stinger already comes
many upgrades to maximize 3D capability not found in other "stock"
kits. The Stinger uses a super high strength plastic that we're
calling TitasticTM. It's lightweight like Titanium, but has
the vibration dampening characteristics of plastic. All this at an
incredibly great price; makes the Stinger the best value in glow powered
RC helicopters.
Product Specifications
- Full length of Fuselage: 1130mm (44.5")
- Full Width of Fuselage: 232mm (9.1")
- Total Height: 432mm (17")
- Main Rotor Diameter: 1248mm (49.1")
- Tail Rotor Diameter: 244mm (9.6")
- Gear Ratio: 9.56:1:5
- Fully Equipped Weight: 2850g (6.25lbs)
- Materials: Titastic™, Aircraft Grade
Aluminum, and Plastic
|
|
